Figure 48 Configuration > Network page
You can change:
Protocol version — selects the Internet Protocols that will be enabled. Select IPv4 only, IPv6
only, or both IPv4 and IPv6 protocols. The default is the IPv4 protocol only.
Host Name — enter the host name provided by your network administrator for the library.
Domain name — enter the domain name provided by your network administrator for the
Enable HTTPS — when On, the RMI can only be accessed through an HTTPS connection.
HTTPs provides authenticated and encrypted transfer of data over the Internet and is
commonly used for secure web communication.
Disable HTTP (Port 80) — when On, the library cannot be accessed through Port 80.
Operating the tape library