Figure 4 OCP LEDs
For MSL2024 OCP functions, see
For MSL4048, MSL8048, and MSL8096 OCP functions, see
and MSL8096 OCP" (page 112)
The back panel provides access to the drive interface connectors, the tape drive, the power
connector, the Ethernet, serial and USB ports, and the magazine release holes as shown in
Figure 5 (page 10)
Figure 5 MSL2024 back panel overview
1. Tape drive assembly
3. Power connector
5. Pull-out tab containing the serial number and other
7. Serial port (Factory use only)
9. USB port
Ready. Illuminated when power is on. Blinking when there is tape drive or robotics activity.
Clean. Illuminated when the tape drive has determined that a cleaning cartridge should be used.
Cleaning is only necessary when the device directs you to do so. Additional cleaning is not
Attention. Illuminated if the device has detected a condition that requires attention by the operator.
Error. Illuminated if an unrecoverable error occurs. A corresponding error message displays on
the LCD screen. For more information, see
"Using the MSL2024 OCP" (page
"Using the MSL4048, MSL8048,
4. Magazine release hole
6. Ethernet port
8. Controller health status indicator