"Rebooting the library (Operations> Reboot library)" (page 106)
"Enabling password locks (Operations > Enable Library Password Locks)" (page 106)
"Support" (page 107)
"Powering a drive on or off (Support > Power On/Off Drives)" (page 107)
"Running the demonstration (Support > Run Demo)" (page 107)
"Running the slot to slot test (Support > Run Slot To Slot Test)" (page 108)
"Running the wellness test (Support > Run Wellness Test)" (page 108)
"Upgrading firmware (Support > Library FW Upgrade, Support> Drive FW Upgrade)"
"Forcing the drive to eject a tape (Support > Force Drive To Eject Tape)" (page 111)
"Viewing logs (Support > Library Error Log)" (page 110)
"Downloading a support ticket (Support > Download Support Ticket)" (page 110)
The operator panel includes four LEDs that provide a summary of the device status as detailed
Figure 65 (page
Figure 65 LEDs
Library home screen
The first line of the Home screen displays the device's product name. The second line displays
a brief status message.
Drive status definitions are listed in
Ready. Illuminated when power is on. Blinking during tape drive or robotics activity.
Clean. Illuminated when a cleaning cartridge should be used.
Attention. Illuminated if the device has detected a condition that requires attention.
Error. Illuminated if an unrecoverable error occurs. A corresponding error message displays
on the LCD screen.
Table 16 (page
Using the MSL2024 OCP