HP StoreEver MSL2024 User And Service Manual page 55

Hide thumbs Also See for StoreEver MSL2024:
Table of Contents

Advertisement

Figure 30 Identity > Library page
When the library is partitioned into multiple logical libraries, the information for the library and
the logical libraries is presented as shown in
Figure 31 Identity > Library page with two logical libraries
You can see, but not modify, the following:
Serial Number — the electronic serial number for the device. It should match the serial
number printed on the device's label, located on the pull out tab under the drive on the back
of the device. When the library is configured into multiple logical libraries, the serial number
includes the serial number on the device and the logical library number.
Product ID — how the device identifies itself to the host computer.
Currently Installed Library Firmware x.xx / y.yy
x.xx is the version of the tape library controller firmware
y.yy is the version of the robotics firmware.
Figure 31 (page
55).
Using the RMI
55

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storeever msl4048Storeever msl8048Storeever msl8096

Table of Contents