Support; Powering A Drive On Or Off (Support > Power On/Off Drives); Running The Demonstration (Support > Run Demo) - HP StoreEver MSL2024 User And Service Manual

Hide thumbs Also See for StoreEver MSL2024:
Table of Contents

Advertisement

Support

The Support menu provides access to the following support options:
"Powering a drive on or off (Support > Power On/Off Drives)" (page 107)
"Running the demonstration (Support > Run Demo)" (page 107)
"Running the slot to slot test (Support > Run Slot To Slot Test)" (page 108)
"Running the wellness test (Support > Run Wellness Test)" (page 108)
"Upgrading firmware (Support > Library FW Upgrade, Support> Drive FW Upgrade)" (page 109)
"Viewing logs (Support > Library Error Log)" (page 110)
"Downloading a support ticket (Support > Download Support Ticket)" (page 110)
"Forcing the drive to eject a tape (Support > Force Drive To Eject Tape)" (page 111)
To access the Support menu:
1.
From the Home screen, press Previous or Next until the screen displays Support. Press
Enter to select.
2.
Press Previous or Next until the screen displays your selected function. Press Enter to
select.
Powering a drive on or off (Support > Power On/Off Drives)
Use this option to power a drive on or off without interrupting power to the rest of the device and
the second drive. This is typically used when replacing one drive in a two-drive configuration.
Access to this feature requires the administrator password.
To power on or off the drive or drives:
1.
From the Home screen, press Previous or Next until the screen displays Support. Press
Enter to select.
2.
Press Previous or Next until the screen displays Power On/Off Drives. Press Enter to
select.
3.
Enter the administrator password, if prompted.
4.
Press Previous or Next until the screen displays the drive you need to power on or off. The
screen displays Drive 1. The second line in the display displays the current state, which is
either Power ON or Power OFF.
5.
To change the power status, press Enter. The screen displays either Press Enter to Power
off DRV 1, or Press Enter to Power on DRV 1. Press Enter to select. The Ready LED
blinks during the operations.
Running the demonstration (Support > Run Demo)
Use this option to run a device demonstration program. The demonstration continues until the
Cancel button is pressed on the OCP. During the demonstration the device will move cartridges
to the tape drive and back. At the end of the demonstration the cartridges are returned to their
original slots. Access to this feature requires the administrator password.
To run the demonstration:
1.
From the Home screen, press Previous or Next until the screen displays Support. Press
Enter to select.
2.
Press Previous or Next until the screen displays Run Demo. Press Enter to select.
3.
Enter the administrator password if prompted.
4.
Use Previous and Next to select the number of cycles: 270, 540, 1080, or Endless. Press
Enter to start the demonstration.
5.
While the test is running, the first line of the screen displays Demo Test. The second line
displays the number of cycles completed and the number of errors. The Ready LED blinks
until the test is complete.
Using the MSL2024 OCP 107

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storeever msl4048Storeever msl8048Storeever msl8096

Table of Contents