HP StoreEver MSL2024 User And Service Manual page 76

Hide thumbs Also See for StoreEver MSL2024:
Table of Contents

Advertisement

Figure 49 Configuration > Network Management page
You can change:
SNMP Enabled — When checked, the device can be managed by computers listed in the
SNMP Target IP Addresses field.
SNMP Target IP Addresses — the IP addresses for up to three computers running IPv4
SNMP management software and up to three computers running IPv6 SNMP management
software. IP addresses will not be cleared if SNMP is disabled, but those targets will no
longer be able to manage the library and will not receive traps from the library. You can
select the SNMP version for each target address.
Community Name — a string used to match the SNMP management station and device. It
must be set to the same name on both the management station and the library. The default
community name is public.
76
Operating the tape library

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storeever msl4048Storeever msl8048Storeever msl8096

Table of Contents