Fuji Xerox apeosport-IV 7080 Administrator's Manual page 417

Symptom
The copy is The document is not loaded
misaligned or correctly.
skewed.
The document guides on
the document feeder are not
set in the correct positions.
The paper tray is not
inserted correctly.
The paper guides in Tray 5
are not set in the correct
positions.
The document glass or the
Unable to copy
with the specified document cover is dirty.
size.
The document is a
transparent type such as a
transparency film.
The document is
misaligned.
The document guides on
the document feeder are not
set in the correct positions.
The document is a non-
standard size.
The document is folded.
The document The document is larger than
edges are the printable area.
missing on the
copy.
Outputs are not The Finisher is not attached. The Finisher is required to staple. Install
stapled.
The number of pages to be
stapled exceeds the
maximum number for
stapling.
Cause
Load the document correctly.
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
Load the document correctly, and align the
document guides to the document.
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
Firmly push in the tray until it stops to set it
properly.
Refer to "Loading Paper" (P.42).
Load the document correctly, and align the
paper guides to the document edges.
Refer to "Loading Paper in Tray 4" (P.45).
Clean the document glass or the document
cover.
Refer to "Cleaning the Document Cover and
Document Glass" (P.74).
Place a white sheet of paper on top of the
document when copying.
Load the document correctly.
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
Load the document correctly, and align the
document guides to the document.
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
Specify the document size, and then copy.
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
Flatten the curl and load the document
again.
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
Adjust [Reduce/Enlarge] to copy the
document smaller.
the Finisher, or change the print option
settings to cancel stapling.
Reduce the number of pages. The
following number of pages can be stapled:
Finisher-C1, Finisher-C1 with Booklet
Maker: 50 pages
D2-Staple-Finisher, D2-Staple-Finisher
with Booklet Maker: 100 pages
Trouble during Copying
Remedy
417
15