Fuji Xerox apeosport-IV 7080 Administrator's Manual page 501

Error Code
027-524 [Cause]
[Remedy] Check whether the specified name is being used for another file or folder
027-525 [Cause]
[Remedy] Check whether the file is not being used by another user at the specified
027-526
[Cause]
[Remedy] If the lock directory (*.LCK) exists in the destination, delete it manually,
027-527
[Cause]
[Remedy] Check whether the file is not being used by another user at the specified
027-528
[Cause]
[Remedy] Check whether the save location has free space.
027-529 [Cause]
[Remedy] Contact our Customer Support Center.
027-530 [Cause]
[Remedy] Set the process to be executed when file names are duplicate to other
027-531 [Cause]
[Remedy] When [Rename New File] is set as the process to be executed when file
027-532 [Cause]
[Remedy] When [Rename New File] is set as the process to be executed when file
027-533
[Cause]
[Remedy] Execute the operation again. If the error still is not resolved, contact our
027-543
[Cause]
[Remedy] Check whether the server name of the SMB server is correct.
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.
Cause and Remedy
The machine failed to transfer data using SMB of the Scan to PC service
because a folder could not be created on the SMB server. The specified
folder already exists.
on the SMB server.
During forwarding using SMB of the Scan to PC service, a file could not
be deleted from the SMB server because of one of the following
reasons:
The file does not exist.
The file is opened.
The specified file name is being used as a directory.
save location.
The machine failed to delete the lock directory on the SMB server while
transferring data using SMB of the Scan to PC service.
and then execute the operation again.
During forwarding using SMB of the Scan to PC service, a folder could
not be deleted from the SMB server because of one of the following
reasons:
The file does not exist.
The directory is not empty.
The specified directory name does not exist.
save location.
The machine failed to transfer data using SMB of the Scan to PC service
because no space is available at the save location on the SMB server.
The machine failed to transfer data using SMB of the Scan to PC service
because an unexpected error has been received from the SMB server,
or an unexpected internal error has occurred on the machine.
There are duplicate file names.
[Do Not Save] is set as a handling method when names are duplicated
for scanned files.
than [Do Not Save].
Detected an incorrect filing policy (when add was selected) after
connecting to the server.
names are duplicate, confirm that the file format is not multi-page.
Failed to access the NEXTNAME.DAT file.
names are duplicate, check the NEXTNAME.DAT file is correct.
An internal error occurred.
Customer Support Center.
The SMB server (NetBIOS) name is invalid.
Error Code
15
501