Fuji Xerox apeosport-IV 7080 Administrator's Manual page 511

Error Code
033-523 [Cause]
[Remedy] Confirm the connection of the line (Channel 1) and connect it correctly,
033-524
[Cause]
[Remedy] Confirm the connection of the line (Channel 2) and connect it correctly,
033-525
[Cause]
[Remedy] Confirm the connection of the line (Channel 3) and connect it correctly,
033-526 [Cause]
[Remedy] Confirm the model of the sender's machine, and then execute the
033-527
[Cause]
[Remedy] Confirm the other machine has a problem, and then execute the
033-528
[Cause]
[Remedy] Ask the sender to send again.
033-529 [Cause]
[Remedy] Confirm the other machine has a problem, and then execute the
033-530
[Cause]
[Remedy] Confirm the procedure for DTMF in the User Guide, and then execute
033-531
[Cause]
[Remedy] Confirm the condition of the other machine (memory is full, paper has
033-532 [Cause]
[Remedy] Execute the operation again. If receiving, ask the sender to send again.
033-533
033-534
[Cause]
[Remedy] Do not specify multiple sets.
033-535
[Cause]
[Remedy] Confirm information such as the recipient and folder information, and
033-536 [Cause]
[Remedy] Execute the operation again.
033-537
033-538
[Cause]
[Remedy] Execute the operation again. If the error still is not resolved, contact our
033-539
033-540
033-541
[Cause]
[Remedy] Specify the recipient correctly.
033-542 [Cause]
[Remedy] Specify a connected line.
033-543
[Cause]
[Remedy] Enter a correct fax number, and execute the operation again.
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.
Cause and Remedy
The line (Channel 1) is not connected correctly.
and then execute the operation again.
The line (Channel 2) is not connected correctly.
and then execute the operation again.
The line (Channel 3) is not connected correctly.
and then execute the operation again.
An error occurred during fax transmission.
operation again. If receiving, ask the sender to send again.
An error occurred during fax transmission.
operation again.
An error occurred during fax transmission.
An error occurred during fax transmission.
operation again.
Received a procedure disabled signal.
the operation again.
Received a command rejection signal.
run out, or other conditions), and execute the operation again.
An error occurred during fax transmission.
The other machine does not offer a feature to print the number of
document sets sent.
An error occurred during fax transmission.
execute the operation again.
An error occurred during fax transmission.
An error occurred during fax transmission.
Customer Support Center.
The recipient is not specified.
A line was specified that is not connected.
The recipient (fax number) is incorrect.
Error Code
15
511