Fuji Xerox apeosport-IV 7080 Administrator's Manual page 518

15 Problem Solving
Error Code
072-210
072-211
073-210
074-210
074-211
077-311
077-330
078-210
078-211
078-213
078-214
078-250
078-260
15
078-261
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.
518
[Cause] Tray 2 malfunction
[Remedy] Confirm the paper loading condition for Tray 2, and then switch off the
machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the error still is not resolved, contact our
Customer Support Center. You can use a tray other than Tray 2.
[Cause] An error occurred in Tray 2.
[Remedy] Switch off the machine power, make sure that the touch screen is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
[Cause] Tray 3 malfunction
[Remedy] Confirm the paper loading condition for the Tray, and then switch off the
machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the error still is not resolved, contact our
Customer Support Center. You can use a tray other than Tray 3.
[Cause] Tray 4 malfunction
[Remedy] Confirm the paper loading condition for the Tray, and then switch off the
machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the error still is not resolved, contact our
Customer Support Center. You can use a tray other than Tray 4.
[Cause] An error occurred in Tray 4.
[Remedy] Switch off the machine power, make sure that the touch screen is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
[Cause] High Capacity Feeder Communication error.
[Remedy] Switch off the machine power, make sure that the touch screen is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
[Cause] Tray 6 (HCF) malfunction
[Remedy] Contact our Customer Support Center.
[Cause] Tray 5 malfunction
[Remedy] Confirm the paper loading condition of Tray 5, and then turn the
machine off and then on. If the error still is not resolved, contact our
Customer Support Center.
[Cause] An error occurred in Tray 6 (HCF).
[Remedy] Switch off the machine power, make sure that the touch screen is blank,
and then switch on the machine power. If the error still is not resolved,
contact our Customer Support Center.
[Cause] Tray 6 (HCF) or Tray 7 (HCF) malfunction
[Remedy] Confirm the paper loading condition for Tray 6 (HCF) or Tray 7 (HCF),
and then turn the machine off and then on. If the error still is not resolved, contact
our Customer Support Center.
Cause and Remedy