Fuji Xerox apeosport-IV 7080 Administrator's Manual page 636

16 Appendix
Parameter
Print control
16
636
Item No.
150 Selects a graphics language. This setting affects to IW, OW, and UC of
(HP-GL mode) HP-GL/2 commands.
[0] (Default)
[1]
Note
151 Sets the size of hard clip area.
(Hard clip) In HP-GL mode, the plottable area is determined in line with the paper
size, apart from the printable area. This area is called the "hard clip area",
and determines the maximum range of pen movement. Accordingly,
images cannot be drawn outside the boundary of the hard clip area.
[0]
[2] (Default)
For more information on hard clip area, refer to "Hard Clip Area" (P.640).
152 (Eject Sets the command that indicates the end of plotting. When the command
command SP) specified here is received, plotting is terminated and the paper is output.
[0] (Default)
153 (Eject
[1]
command
The default value is [ON] for SPO, and [OFF] for the others.
SPO)
Note
154 (Eject
command NR)
155 (Eject
command FR)
156 (Eject
command PG)
157 (Eject
command AF)
158 (Eject
command AH)
Value
: HP-GL
: HP-GL/2
• To print HP-GL/2 command that does not include BP command,
select [HP-GL/2].
: Standard
: Paper
: OFF
: ON
• If multiple commands are specified, when one of the commands is
received, plotting is terminated and the paper is output.