Fuji Xerox apeosport-IV 7080 Administrator's Manual page 130

5 Tools
Paper Type
Select the type of paper to load in the trays.
For information about paper types available on the machine, refer to "Loadable Quantity and Weight for
Supported Paper" (P.36).
Paper Size
When using Trays 1 and 2, you can load both standard size paper and non-standard size
paper. When you load non-standard size paper, select [Custom Size], and then set the size
in the X (width) between 182 and 432 mm and the Y (length) between 140 and 297 mm in 1
mm increments. When using Tray 6 (HCF (A4 1 Tray)), you can load standard size paper
only. Select [Auto Detect].
Note
For more information, refer to "Supported Paper Type" (P.38).
Paper Color
Set the color of paper. The paper color selected here is displayed as the paper color on the
[Paper Supply] screen.
Customize Paper Supply Screen
Select whether the setting items specified in [Paper Size] under [Paper Tray Attributes] are to
be displayed on the [Paper Supply] screen.
Disabled
Does not display the items specified in [Paper Size].
5
Size Detection
Displays the setting in [Paper Size].
Paper Tray Attributes on Setup Screen
Select whether or not to display [Paper Tray Attributes] in the [Setup] screen or not.
This setting allows you to select the size and type of paper without entering the System
Administration mode.
Paper Tray Attributes During Loading
Select whether or not to display the [Paper Tray Attributes] screen after the tray is pulled out
or inserted in.
This setting applies to Trays 1 to 4 and 6 (optional) and 7 (optional). You cannot apply this
setting to Tray 5.
Paper Tray Priority
Set the priority of the trays to use when paper of the same size and the same orientation is
set in the multiple trays or print data does not include the paper tray information for automatic
tray selection.
Auto Paper selection means that a tray containing the appropriate paper is automatically
selected by the machine for copying or printing.
This setting applies to Trays 1 to 4 and 6 (optional), and 7 (optional). You cannot apply this
setting to Tray 5.
Note
130
• The paper size for Trays 3 and 4 is fixed to A4. For information about changing the paper
size for Trays 3 and 4, contact our Customer Support Center.
• When a logical printer is used and if you specify the paper tray with the print driver, this
setting will be ignored.