Table of Contents
Advertisement
Item
Status
Total
Description
The result of the operation is indicated.
Completed......The operation ended normally.
Busy ...............The recipient is busy or did not answer.
Auto Send ......The document is being re-sent and the set re-
send times has not been exceeded.
Canceled........The communication was terminated.
Check Remote Station ... An error caused by the recipient or
Send Again
... The document must be re-sent
Receive Again
... A polling request must be re-sent
Disconnected
... Check that the line is properly
... When IP Fax (SIP) is used, check
XXX-XXX
Error code
For more information on lines, refer to "2 Product Overview" >
"Machine Components" > "Telephone line connectors" in the User
Guide and for more information on XXX-XXX (error code), refer to
"Error Code" (P.449).
For more information on how to connect network cables, refer to
"Using the Ethernet Interface" (P.21) and for more information on
XXX-XXX (error code), refer to "Error Code" (P.449).
All pages received or sent are recorded.
Activity Report
the line during communication.
because the re-send times have
reached the maximum due to a
transmission error.
due to a polling reception error.
Or, you must ask a sender to re-
send the document due to a
reception error.
connected.
that the network cable is properly
connected.
16
691
Advertisement
Chapters
Table of Contents
