Screen/Button Settings - Fuji Xerox apeosport-IV 7080 Administrator's Manual

Line Monitor Volume
When sending a fax, you can relay the sound on the telephone line until the connection is
made through the speakers on the machine. This is convenient for Fax Information Services
without using the telephone receiver.
You can select a volume level from [Soft], [Normal], or [Loud]. To disable the sound, select
[Off].
Ringing Volume
Set the volume to be sounded when the machine receives a fax.
You can select from [Soft], [Normal], and [Loud]. To disable the sound, select [Off].

Screen/Button Settings

Set screens and buttons.
Screen Default
Set the screen displayed after powering on the machine or canceling Energy Saver mode.
For more information on the setting procedure, refer to "Customizing the Control Panel" (P.26).
Screen After Auto Clear
Set the screen displayed after Auto Clear.
For more information on the setting procedure, refer to "Setting the Screen After Auto Clear" (P.27).
Auto Display of Login Screen
When the Authentication feature is enabled on the machine, set whether or not to
automatically display the login screen after turning on the machine or canceling Energy Saver
mode.
Custom Buttons 1 to 3
You can assign services such as Copy and Send from Folder to the custom buttons on the
control panel: Custom Button 1 to Custom Button 3.
To leave a feature unassigned, select [(Not Set)].
Note • Copy service is assigned to [Custom Button 1] and Review is assigned to [Custom Button 3]
For more information, refer to "Assigning Services to the Custom Buttons" (P.32).
One-touch Buttons
Set the number of address numbers that are assigned to the one touch buttons.
Type 1
Assigns the one touch buttons 1 to 70 to the address numbers 0001 to 0070, and
buttons M01 and M02 to the stored programming jobs 1 and 2.
Type 2
Assigns the one touch buttons 1 to 60 to the address numbers 0001 to 0060, and
buttons 61 to 70, M01, and M02 to the stored programming jobs 1 to 12.
Note • [Type 1] is selected by factory default.
Services Home
Set the layout of service buttons that appear on the [Services Home] screen.
For more information on how to set the buttons, refer to "Customizing the Button Layout" (P.28).
by factory default.
Common Service Settings
127
5