Fuji Xerox apeosport-IV 7080 Administrator's Manual page 66

3 Maintenance
1
Make sure that the machine is not operating,
and open the finisher right door.
2
Hold the [R1] at the position shown in the
figure.
3
3
Pull the staple cartridge out of the finisher.
Note
4
Hold the positions indicated by an arrow to
remove the staple cartridge from the unit.
5
Push a new staple cartridge into the unit.
66
• The staple cartridge is firmly inserted. A
slight force is required to pull the cartridge
out of the finisher.
[R1]