Loading Paper In Tray 3 - Fuji Xerox apeosport-IV 7080 Administrator's Manual

2 Paper and Other Media
2
Turn tab paper face down with its tabs
oriented to the right, and then load it into the
tray by aligning its left edge against the left-
side of the tray.
3
Hold the paper guide by its lever, and then slide the guide to fit snugly against the
edge of the paper.
Important • Do not load paper above the maximum fill line. It might cause paper jams or machine
2
Note
4
Push the tray in gently until it stops.
Important • When pushing the paper tray in, do it slowly. If the tray is pushed with too much force, it

Loading Paper in Tray 3

The following describes the procedure for loading paper in Tray 3.
When the machine runs out of paper during copying or printing, a message is displayed
on the touch screen. Add paper according to the displayed instructions. Copying or
printing automatically resumes when paper is added.
Note
1
Pull out the tray until it stops.
Important • While the machine is processing a job, do
2
Load and align the edges of the paper
against the left edge of the tray with the side
to be copied or printed on facing down.
Important • Do not load paper above the maximum fill
3
Push the tray in gently until it stops.
Important • When pushing the paper tray in, do it slowly. If the tray is pushed with too much force, it
44
malfunctions.
• When loading tab paper, place the paper with its tab side to the right as shown in the
illustration.
• When copying or printing on multiple set of tab stock of a set with which tab positions differ,
load each tab paper with the side to be copied or printed on facing down to set the first paper
coming on top.
might cause machine malfunctions.
• Fan the paper well before loading paper in a tray. It prevents paper from sticking to each
other and reduces paper jams.
not pull out the tray that the job uses.
• Do not add a new stack of paper on top of
the remaining paper in the tray to prevent
paper jams or any other troubles. First,
remove the remaining paper from the
tray, and then load the new stack of
paper.
line. It might cause paper jams or
machine malfunctions.
might cause machine malfunctions.