Activity Report - Fuji Xerox apeosport-IV 7080 Administrator's Manual

Activity Report

You can print activity reports to check whether a transmission is successfully
completed or not. In the report, a remote terminal name and a result or a status of each
operation are recorded by outgoing and incoming transmission.
Note • The use of ApeosWare Log Management (sold separately) or ApeosWare Accounting
For information on how to print the activity report, refer to "Print Reports" (P.83).
Item
No.
Doc.
Remote Station
Start Time
Duration
Service (sold separately) allows you to import the contents of an Activity Report to a
computer. For information on ApeosWare Log Management or ApeosWare Accounting
Service, refer to the manuals provided with the software.
The serial numbers for transmissions is shown.
Job numbers that the machine automatically assigned to
documents when the documents were received.
Information on recipient to which transmission is made is
recorded in the following order of priority.
Transmitting (speed dialing)
Recipient
Remote terminal name
G3 ID (including spaces)
Tel. No.
When IP Fax (SIP) is used:
SIP address
Communication mode IP Fax or IP Fax-ECM
Communication mode EC (or G3, SG3)
Transmitting (when all digits are dialed)
Remote terminal name
G3 ID (including spaces)
Tel. No.
Communication mode EC (or G3, SG3)
When IP Fax (SIP) is used:
SIP address
Communication mode IP Fax or IP Fax-ECM
Receiving
Remote terminal name
G3 ID (including spaces)
Communication mode EC (or G3, SG3)
When IP Fax (SIP) is used:
Communication mode IP Fax or IP Fax-ECM
Note • You can set the number of character digits displayed for
The date and time that the communication began are shown.
In Batch Send, the start time of the transmission for each doc-
ument is recorded.
The duration of the transmission is displayed. In Batch Send,
it is the length of time taken to transmit each document is
recorded.
Description
the recipient whether the first 40 digits or the last 40
digits. For details on setting up, see "Activity Report -
Recipient" (P.134). The factory default displays the first
40 digits.
Activity Report
16
689