Clutch Disassembly - Polaris 2015 RZR 900 Service Manual

Clutch Disassembly

1. Remove driven clutch from the transmission input
shaft. NOTE: If driven clutch is difficult to remove,
use 2871056 Driven clutch puller to remove driven
clutch. Do not attempt disassembly of the driven
clutch from the outside snap ring. The driven clutch
must be disassembled from the helix side.
2. It is important to mark the position of the shaft, cam
cover and sheave before disassembly or use the X's
on the components for reference. This will aid in
assembly and maintains clutch balance.
3. Remove the four screws
4. Place the driven clutch into the Universal Clutch
9925723 R01 - 2015 RZR 900 Service Manual
© Copyright 2014 Polaris Industries Inc.
1
(helix) assembly using a T25 Torx driver.
Compressor PU-50518.
PVT SYSTEM
that secure the cam
5
5.23