Driven Clutch Service; Clutch Disassembly - Polaris Ranger RZR XP 900 2011 Service Manual

DRIVEN CLUTCH SERVICE
Clutch Disassembly
1. Remove driven clutch from the transmission input shaft.
Do not attempt disassembly of the driven clutch from the
outside snap ring. The driven clutch must be disassembled
from the helix side.
Do not disassemble from this side
CLUTCHING (PVT)
4. Place the clutch into the Driven Clutch Compression Tool
PU-SOS18.
PU-50518
5. Press down on the top of the spider assembly, pushing the
spider onto the shaft. Remove snap ring (A) and slowly
release the assembly.
2. It is important to mark the position ofthe shaft, cam cover,
and sheave before disassembly or use the X's on the
components for reference. This will aid in reassembly and
helps to maintain clutch balance after reassembly.
3. Remove the four screws that secure the cam (helix)
assembly using a T25 Torx driver.
Press down
on spider
I
6.21
9923144 - 2011 RANGER RZR XP 900 Service Manual
© Copyright 2011 Polaris Sales Inc.