Water Pump Installation - Polaris 2015 RZR 900 Service Manual

ENGINE / COOLING SYSTEM
20. Install two new water pump o-rings and lubricate
them with clean engine oil.
Bolt
9
Loctite 204
10
Mechanical Seal
11
O-Rings
12

Water Pump Installation

1. Replace the two sealing o-rings
housing.
NOTE: Always use NEW o-rings each time the
water pump is removed.
3.18
21. Install water pump assembly into the engine. (see
Washers
13
Drive Tab
14
Water Pump Shaft
15
Water Pump Housing
16
2. Lubricate new o-rings
on the water pump
1
3. Remove the shop towel from the water pump drive
9925723 R01 - 2015 RZR 900 Service Manual
© Copyright 2014 Polaris Industries Inc.
Chapter 3 – Water Pump Installation, page 3.18)
Oil Seal
17
Impeller
18
Washer
19
with clean engine oil.
1
access hole in the engine block.