Polaris 2015 RZR 900 Service Manual page 250

TRANSMISSION
10. Torque left side mounting bolts to specification in
sequence.
11. Torque right side mounting bolts to specification using
the numbered sequence shown.
Engine / Transmission Mounting Bolts:
Step 1-2: 64 ft-lb (87 Nm)
Step 3: 5 ft-lb (7 Nm)
Step 4-7: 44 ft-lb (60 Nm)
12. Remove the clutch center distance tool.
13. Remove the spacer or support between the vehicle
frame and engine.
6.12
14. Install and properly route the gear position switch
connector
position sensor connector
bracket bolts
onto the transmission.
15. Torque the two shift cable bracket bolts to
specification.
16. Install three wire ties to retain wire harness to
transmission and mounts.
9925723 R01 - 2015 RZR 900 Service Manual
© Copyright 2014 Polaris Industries Inc.
, speed sensor connector
, shift bracket and shift
, shift cable clevis pin and washer
Shift Cable Bracket Bolts:
17 ft-lb (23 Nm)
, crankshaft