Engine Service; Lubrication Specifications; Engine Oil Pressure Test - Polaris 2015 RZR 900 Service Manual

ENGINE / COOLING SYSTEM

ENGINE SERVICE

Lubrication Specifications

Oil Capacity*
Oil Filter Wrench
Oil Filter
Oil Type
Ambient Temp Range:
-35° F to 100° F
Oil Type
Ambient Temp Range:
0° F to 120° F
Oil Pressure (idle)
* Additional oil may be required after complete engine
disassembly. Check level after filling and add oil as
needed.
3.20
≈ 2.5 Quarts (2.4 L)
PU-50105 or 2.5" (64
mm)
2540086
PS-4 Synthetic Engine Oil
2876244 – Qt
PS-4 Extreme Duty
Synthetic Engine Oil
2878920 – Qt
at 70° F: 72 PSI
at 220° F: 60 PSI
9925723 R01 - 2015 RZR 900 Service Manual
© Copyright 2014 Polaris Industries Inc.

Engine Oil Pressure Test

1. Attach the Oil Pressure Gauge Adapter (PU-50565)
to the Oil Pressure Gauge (PV-43531).
Oil Pressure Gauge: PV-43531
Oil Pressure Gauge Adapter: PU-50565
2. Clean the area around the main oil gallery plug
located in the upper crankcase on the MAG side of
the engine.
3. Remove the plug and insert the oil pressure adapter.
4. Start engine and allow it to reach operating
temperature. Monitor the gauge.
NOTE: Test results are based on the use of the
recommended engine oil (Polaris PS-4 or PS-4
Extreme Duty) at operating temperature, and may
vary considerably if any other oil is used or if the
engine is not up to operating temperature.
Oil Pressure (engine at operating temp)
Standard @ 1200 RPM: 60 PSI
Minimum: 15 PSI
5. Upon assembly, torque the crankcase gallery plug to
specification.
Crankcase Gallery Plug:
11 ft-lb (15 Nm)
,
1