Polaris 2015 RZR 900 Service Manual page 226

Hide thumbs Also See for 2015 RZR 900:

Table of Contents

5. Press down on the top of the spider assembly,

pushing the spider onto the shaft. Remove snap ring

and slowly release the assembly.

6. Remove the spider assembly and spring

NOTE: Spring is compression only and has no

torsional wind.

7. Remove the inside spider plate

and replace if needed.

8. Remove the E-clips

9. Remove the clutch assembly from the holding tool.

10. Press out the spring pins

9925723 R01 - 2015 RZR 900 Service Manual

. Inspect the spider dampener for wear

. Inspect the rollers for wear; replace if worn.

in the inner sheave.

, and the clutch

Show Quick Links

Chapters

Table of Contents