Polaris 2015 RZR 900 Service Manual page 351

49. Fill body with oil about 0.750" from top, or about
1.250" from top on cup shocks.
50. Quickly pass a propane torch over oil to eliminate any
micro air bubbles.
51. Install the shock shaft assembly so the piston
assembly is just below the retaining ring groove in the
body.
52. Slowly compress the bearing assembly to release
any air that may be trapped below the bearing
assembly.
53. Apply a thin layer of shock oil to the bearing
assembly's external O-ring.
54. Push bearing assembly in with your finger tips.
55. Install retaining ring.
56. Use IFP tool to push down on IFP and fully extend the
shock shaft assembly.
9925723 R01 - 2015 RZR 900 Service Manual
© Copyright 2014 Polaris Industries Inc.
STEERING / SUSPENSION
8
8.43