Troubleshooting; Shifting Difficulty - Polaris 2015 RZR 900 Service Manual

TRANSMISSION

TROUBLESHOOTING

Shifting Difficulty

Check the following items when shifting difficulty is
encountered.
• Shift cable adjustment/condition
• PVT alignment (clutch center distance)
• Idle speed (throttle cable routing)
• Transmission lubricant type/quality
• Loose fasteners on sector gear cover
• Worn rod ends, clevis pins, or pivot arm bushings
• Shift selector rail travel
• Worn, broken or damaged internal transmission
components
NOTE: To determine if shifting difficulty or
problem is caused by an internal transmission
problem, isolate
disconnecting the shift cable end from the
transmission bellcrank. Manually select each
gear range at the transmission bellcrank, and
test ride vehicle. If it functions properly, the
problem is outside the transmission.
If transmission problem remains, disassemble
transmission and inspect all gear dogs for
wear (rounding) or damage. Inspect all
bearings, circlips, thrust washers and shafts
for wear.
6.36
the transmission by
9925723 R01 - 2015 RZR 900 Service Manual
© Copyright 2014 Polaris Industries Inc.