Spider Removal; Roller, Pin And Thrust Washer Inspection - Polaris 2015 RZR 900 Service Manual

Spider Removal

1. Install clutch onto holding fixture (2871358-A) and
secure in bench vice. Loosen and remove the spider
jam nut (counterclockwise) using the Clutch Spider
1
Nut Socket (PU-50578).
Clutch Spider Nut Socket: PU-50578
Clutch Holding Fixture: PN 2871358-A
2. Loosen and remove the spider
using Clutch Spider Removal / Installation Tool (PN
2870341).
Spider Removal / Installation Tool: 2870341
Clutch Holding Fixture: 2871358-A

Roller, Pin and Thrust Washer Inspection

1. Inspect all rollers, roller bushings and roller pins by
pulling a flat metal rod across the roller.
2. Turn roller with your finger. If you notice resistance,
galling, or flat spots, replace the drive clutch.
NOTE: Rollers, pins, thrust washers and buttons
are not serviceable at the time of this publication.
(counterclockwise)
9925723 R01 - 2015 RZR 900 Service Manual
© Copyright 2014 Polaris Industries Inc.
PVT SYSTEM
5
5.15