Polaris 2015 RZR 900 Service Manual page 115

8. Remove and clean oil pump pick-up
9. Remove the three bolts
9
to the crankcase.
10. Use one of the oil pump retaining bolts or a pen
magnet to extract the dowel pins
pump. Doing so allows for oil pump removal without
having to remove the pump drive sprocket.
NOTE: If unable to extract the dowel pins from
the oil pump, the oil pump sprocket must be
removed. Access the sprocket bolt by removing
the case plug.
.
that retain the oil pump
10
from the oil
11
9925723 R01 - 2015 RZR 900 Service Manual
© Copyright 2014 Polaris Industries Inc.
ENGINE / COOLING SYSTEM
11. Lift the oil pump drive chain and remove the oil
pump.
12. Visually inspect the oil pump and drive sprocket
for wear or damage. Replace oil pump drive chain
and sprocket if worn or damaged. If any part of the oil
pump is damaged, the entire assembly must be
replaced. Replace the oil pump seal
crankcase assembly.
NOTE: Oil pump assembly is non-serviceable
13. Rotate the engine so the cylinder is facing up.
3
12
during
13
3.49