Body Assembly Views; Cab Frame Assembly - Polaris 2015 RZR 900 Service Manual

BODY ASSEMBLY VIEWS

Cab Frame Assembly

NOTE: Finger tighten all components until cab frame is completely assembled on vehicle and then tighten to
specification.
1. Install hip bolster and secure the bottom mount with M8x1.25x20 bolts. Torque fasteners to 14 ft-lb (19 Nm).
2. Install rear ROPS to the frame with M10x1.5x45 bolts and nuts. Torque fasteners to 40 ft-lb (54 Nm).
3. Install hip bolster to mount to the rear ROPS with M8x1.25x55 fasteners. Torque fasteners to 17 ft-lb (23 Nm)
4. Install front ROPS to the frame with M10x1.5x45 fasteners. Install front ROPS to rear ROPS and front ROPS cross
brace to the left and right front ROPS with M10x1.5x20 screws. Torque fasteners to 40 ft-lb (54 Nm).
5. Install visor on front ROPS with M6x1.0x25 screws. Torque fasteners to 8 ft-lb (11 Nm).
Rear ROPS
1
Visor
Front ROPS — Left
Front ROPS Cross Brace
Front ROPS — Right
Hip Bolster
M8 x 1.25 x 55 Screw 16 ft-lb (22 Nm)
M8 x 1.25 Nut
M8 x 1.25 x 20 Bolt 16 ft-lb (22 Nm)
9
M10 x 1.5 x 45 Screw 40 ft-lb (54 Nm)
10
M10 x 1.5 Nut 40 ft-lb (54 Nm)
11
Clip
12
M10 x 1.5 x 20 Screw 40 ft-lb (54 Nm)
13
M6 x 1.0 x 25 Screw 8 ft-lb (11 Nm)
14
9925723 R01 - 2015 RZR 900 Service Manual
© Copyright 2014 Polaris Industries Inc.
BODY / FRAME
10
10.3