Keyless Start System Check - Suzuki 2006 SX4 Service Manual

Keyless Start System Check

Step
1 1) Record details of the problem. For your record, use of a
questionnaire form will facilitate collecting information for
proper analysis and diagnosis.
2) Check if the problem described in "Customer
Questionnaire (Example)" actually occurs in the vehicle.
(This step should be performed with the customer if
possible.)
Perform "Keyless Start System Operation Inspection"
procedure to check if the symptom which has occurred is
abnormal or not.
3) Check for DTC referring to "DTC Check", and then
record DTC(s).
4) Clear DTC referring to "DTC Clearance" if any DTC
exists, and then recheck for DTC.
Is any DTC still detected?
2 1) Check and repair referring to applicable "DTC Table".
Are check and repair complete?
3 1) Inspect and repair basic parts referring to "Keyless Start
System Symptom Diagnosis".
Is there faulty condition?
4 1) Check for intermittent problems referring to "Intermittent
and Poor Connection Inspection in Section 00".
Is there any faulty condition?
5 1) Confirm if the problem is solved and the keyless start
system is free from any abnormal conditions. If what has
been repaired is related to the DTC, clear the DTC once
and then confirm that no DTC is indicated.
Is there any problem symptom, DTC or abnormal condition?
Action
Keyless Start System:
Yes
Go to Step 2.
Go to Step 5.
Repair or replace
malfunction part(s), and
go to Step 5.
Repair or replace
malfunction part(s), and
go to Step 5.
Go to 2) of Step 1 and
perform trouble
diagnosis again.
10E-9
S6RW0DA504004
No
Go to Step 3.
Check and repair
malfunction part(s), and
go to Step 5.
Go to Step 4.
Go to Step 5.
End.