Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 744

BFR-UPB5 Adj Swng Roll rising tmg for B5: Fin-A1
Lv.1 Details To adjust the Swing Roller rise timing when B5 size paper is waited
in the buffer path.
As the value is incremented by 1, the rise timing becomes early by 1
msec.
Use case When misalignment occurs in B5 size buffer paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 50
Unit 1 msec
BFR-UPLT Adj Swng Roll rising tmg for LTR: Fin-A1
Lv.1 Details To adjust the Swing Roller rise timing when LTR size paper is waited
in the buffer path.
As the value is incremented by 1, the rise timing becomes early by 1
msec.
Use case When misalignment occurs in LTR size buffer paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 50
Unit 1 msec
RTR-DWA4 Adj Ppr Rtn Roll fall tmg (A4): Fin-A1
Lv.1 Details To adjust the Paper Return Roller fall timing when A4 size paper is
waited in the buffer path.
As the value is incremented by 1, the fall timing becomes early by
1msec.
Use case When misalignment occurs in A4 size buffer paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
5
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 50
Unit 1 msec
RTR-DWB5 Adj Ppr Rtn Roll fall tmg (B5): Fin-A1
Lv.1 Details To adjust the Paper Return Roller fall timing when B5 size paper is
waited in the buffer path.
As the value is incremented by 1, the fall timing becomes early by
1msec.
Use case When misalignment occurs in B5 size buffer paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 50
Unit 1 msec
5-516
SORTER> ADJUST SORTER> ADJUST
RTR-DWLT Adj Ppr Rtn Roll fall tmg (LTR): Fin-A1
Lv.1 Details To adjust the Paper Return Roller fall timing when LTR size paper is
waited in the buffer path.
As the value is incremented by 1, the fall timing becomes early by
1msec.
Use case When misalignment occurs in LTR size buffer paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 50
Unit 1 msec
BF-SB-A4 Adj switchback position for A4: Fin-A1
Lv.1 Details To adjust the paper switchback position when A4 size paper is waited
in the buffer path.
As the value is incremented by 1, the switchback amount is
increased by 1mm.
Use case When misalignment occurs in A4 size buffer paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 50
Unit 1 mm
BF-SB-B5 Adj switchback position for B5: Fin-A1
Lv.1 Details To adjust the paper switchback position when B5 size paper is waited
in the buffer path.
As the value is incremented by 1, the switchback amount is
increased by 1mm.
Use case When misalignment occurs in B5 size buffer paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 50
Unit 1 mm
BF-SB-LT Adj switchback position for LTR: Fin-A1
Lv.1 Details To adjust the paper switchback position when LTR size paper is
waited in the buffer path.
As the value is incremented by 1, the switchback amount is
increased by 1mm.
Use case When misalignment occurs in LTR size buffer paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 50
Unit 1 mm