Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 618

COPIER> OPTION> USER
HDCR-DSP Setting of HDD complete delete method
Lv.2 Details To set data deletion method of HDD data complete deletion function.
Use case When switching the deletion method in HDD data complete deletion
mode
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 4
1: 1-time deletion with 0 data, 2: 1-time deletion with random data, 3:
3-time deletion with random data, 4: DOD
Default value 1
Supplement/memo HDD data complete deletion function: a function to completely delete
data in HDD by overwriting with 0 (null) data or random data to the
file data when logically deleting file on HDD (deleting management
information data).
JOB-INVL Job intvl setting at interruption copy
Lv.2 Details To set output interval between jobs at the time of interruption copy.
Sorting is difficult after interruption copy because of the continuous
output of the next job. Paper interval becomes longer when starting
pickup for the next job after the last sheet of the previous job is
delivered.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2
0: Continuous output of the interruption copy and the next job
1: Starting pickup for the next job after the interruption copy is
delivered all.
5
2: Starting pickup for the next job after the previous job is delivered
all. (For all jobs)
Default value 0
LGSW-DSP ON/OFF of "Log display ON/OFF setting"
Lv.2 Details To set whether to display "Management Settings> Device
Management> Display Log" in user mode.
When "1: ON" is set, "Display Log" is displayed in the "Device
Management" screen. When ON is set, the logs of each job are
displayed in "System Status."
When "0: OFF" is set, "Display Log" is not displayed in the "Device
Management" screen, and the logs of each job are not displayed
either.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Related user mode Management Settings > Device Management > Display Log
5-390
COPIER> OPTION> USER
TAB-ROT Set of landscape img rotn at PDL:tab ppr
Lv.1 Details To set whether to rotate landscape image by 180 degrees when PDL
print is made on tab paper.
When "1: Rotated" is set, image is rotated.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Not rotated, 1: Rotated
Default value 0
PR-PSESW Display/hide of output Stop button
Lv.1 Details To set whether to display or hide [Stop] button on the Status Monitor
screen.
Use case • Upon user's request.
• When promptly stopping the print job in operation or under
reservation
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
IDPRN-SW Charge target job set of dept mngm cntr
Lv.1 Details To set the job type that advances the department management
counter.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0:
PRINT category: Box Print, Report Print, Send Local Print, PDL
Print
COPY category: COPY
1:
PRINT category: Report Print, Send Local Print, PDL Print
COPY category: COPY, Box Print
Default value 0