Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 321

COPIER> DISPLAY> HT-C
SUM-B-C2 ARCDAT scrn B C-clr ctrl differ(1/2 SPD)
Lv.2 Details To display C-patch control difference of screen B in ARCDAT control
at 1/2 speed.
When hue variation occurs and the value shown is not in the
tolerable range, execute auto gradation adjustment (reset the target
value). Check the Patch Sensor or replace the developer if not
corrected.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range -1023 to 1023
Default value 0
Supplement/memo Screen B: Low screen ruling screen
SUM-B-K2 ARCDAT scrnB Bk-clr ctrl differ(1/2 SPD)
Lv.2 Details To display Bk-patch control difference of screen B in ARCDAT control
at 1/2 speed.
When hue variation occurs and the value shown is not in the
tolerable range, execute auto gradation adjustment (reset the target
value). Check the Patch Sensor or replace the developer if not
corrected.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range -1023 to 1023
Default value 0
Supplement/memo Screen B: Low screen ruling screen
SUM-C-Y2 ARCDAT scrn C Y-clr ctrl differ(1/2 SPD)
Lv.2 Details To display Y-patch control difference of screen C in ARCDAT control
at 1/2 speed.
When hue variation occurs and the value shown is not in the
tolerable range, execute auto gradation adjustment (reset the target
value). Check the Patch Sensor or replace the developer if not
corrected.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range -1023 to 1023
Default value 0
Supplement/memo Screen C: Copier image processing screen
COPIER> DISPLAY> HT-C
SUM-C-M2 ARCDAT scrn C M-clr ctrl differ(1/2 SPD)
Lv.2 Details To display M-patch control difference of screen C in ARCDAT control
at 1/2 speed.
When hue variation occurs and the value shown is not in the
tolerable range, execute auto gradation adjustment (reset the target
value). Check the Patch Sensor or replace the developer if not
corrected.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range -1023 to 1023
Default value 0
Supplement/memo Screen C: Copier image processing screen
SUM-C-C2 ARCDAT scrn C C-clr ctrl differ(1/2 SPD)
Lv.2 Details To display C-patch control difference of screen C in ARCDAT control
at 1/2 speed.
When hue variation occurs and the value shown is not in the
tolerable range, execute auto gradation adjustment (reset the target
value). Check the Patch Sensor or replace the developer if not
corrected.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range -1023 to 1023
Default value 0
Supplement/memo Screen C: Copier image processing screen
SUM-C-K2 ARCDAT scrnC Bk-clr ctrl differ(1/2 SPD)
Lv.2 Details To display Bk-patch control difference of screen C in ARCDAT control
at 1/2 speed.
When hue variation occurs and the value shown is not in the
tolerable range, execute auto gradation adjustment (reset the target
value). Check the Patch Sensor or replace the developer if not
corrected.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range -1023 to 1023
Default value 0
Supplement/memo Screen C: Copier image processing screen
5
5-93