Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 169

E Detailed Occurance Items
code code area
E720 -0004 -05 Title Model mismatch error
Description A Finisher that is not supported is connected.
of detection
Measures Check the configuration of accessories.
A Finisher that is not supported is connected to the host
machine.
E730 -1001 -00 Title PDL software failure
Description Initialization error
of detection
Measures 1. PDL reset processing
2. Power cycle (Power OFF/ON)
E730 -100A -00 Title PDL software failure
Description In case system fatal error such as initialization failure
of detection occurs
Measures 1. PDL reset processing
2. Power cycle (Power OFF/ON)
E730 -A006 -00 Title PDL software failure
Description No response from PDL. In the case of no response from
of detection PDL due to Subbootable failure or no existence.
Measures 1. PDL reset processing
2. Power cycle (Power OFF/ON)
3. Main controller board connection check
4. Re-installation of firmware
5. Main controller board replacement
E730 -A007 -00 Title PDL software failure
Description In case of discrepancy of the version between the control
of detection software in main unit and PDL control software.
Measures 1. PDL reset processing
2. Power cycle (Power OFF/ON)
3. System full-format and installation
E730 -B013 -00 Title PDL software failure
Description Font data is damaged
of detection
Measures 1. Power cycle (Power OFF/ON)
2. System re-installation
3. System full-format and installation
E730 -C000 -00 Title PDL software failure
Description Memory acquisition error in the initialization
of detection
Measures 1. System full-format and installation
2. Main controller board 1 replacement
Description E Detailed Occurance Items
code code area
E730 -C001 -00 Title PDL software failure
Description HDD access error
of detection
Measures 1. System full-format and installation
2. HDD replacement
3. Main controller board 1 replacement
E731 -3000 -00 Title Image processing module failure
Description Image processing module failure
of detection
Measures Main controller board 2 replacement
E731 -3001 -00 Title Image processing module failure
Description Image processing module failure
of detection
Measures Main controller board 2 replacement
E731 -3002 -00 Title Image processing module failure
Description Image processing module failure
of detection
Measures Main controller board 2 replacement
E731 -3015 -00 Title Image processing module failure
Description Image processing module failure
of detection
Measures Main controller board 2 replacement
E732 -0000 -00 Title Reader communication is abnormal
Description Negotiation failure
of detection
Measures 1. Connected connector check with the reader
2. Power supply check for the reader (check if
3. Replacement of the reader controller board and main
E732 -0001 -00 Title Reader communication is abnormal
Description Communication error
of detection
Measures 1. Connected connector check with the reader
2. Power supply check for the reader (check if
3. Replacement of the reader controller board and main
E732 -8888 -00 Title Error in the reader type
Description When a scanner for the different model is detected during
of detection the communication with the reader.
Measures Replace to the proper reader.
Description
initialization is executed in startup)
controller board
initialization is executed in startup)
controller board
3
3-143