Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 474

COPIER> ADJUST> FEED-ADJ
ADJ-MDK3 Write pstn in horz scan:Multi Deck(Lowr)
Lv.1 Details To adjust the image write start position in the horizontal scanning
direction when feeding paper from the Multi Deck (Lower) (paper
width is within 320 mm.)
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1mm.
+: Left margin becomes larger (An image moves to the right.)
-: Left margin becomes smaller (An image moves to the left.)
When replacing the DC Controller PCB/clearing RAM data, enter the
value of service label.
Use case When replacing the DC Controller PCB/clearing RAM data
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Caution If the paper width exceeds 320 mm, execute mechanical adjustment.
Display/adj/set range -100 to 100
Unit 0.1 mm
Default value 0
REG-H2 Rgst start timing adj: Heavy,1/3 speed
Lv.1 Details To adjust the top margin by changing the timing to turn ON the
Registration Motor when feeding heavy paper at 1/3 speed.
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1 mm.
+: Top margin becomes smaller (An image moves upward.)
-: Left margin becomes larger (An image moves downward.)
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range -50 to 50
5
Unit 0.1 mm
REG-S Rgst start timing adj:Coated, 1/3,1/2SPD
Lv.1 Details To adjust the top margin by changing the timing to turn ON the
Registration Motor in the case of slow feeding of coated paper at 1/3
speed in iR-ADV C9xxx.
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1 mm.
+: Top margin becomes smaller (An image moves upward.)
-: Left margin becomes larger (An image moves downward.)
When Productivity Priority mode is selected in user mode, timing to
turn ON at 1/2 speed is changed and the margin is adjusted.
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range -50 to 50
Unit 0.1 mm
Related user mode Function Settings > Common > Print Settings > Coated Productivity/
Image Quality Priority
5-246
COPIER> ADJUST> FEED-ADJ
REG-MF Rgst start timing adj: MP Tray, Plain
Lv.1 Details To adjust the top margin by changing the timing to turn ON the
Registration Motor when feeding plain paper from the Multi-purpose
Tray.
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1 mm.
+: Top margin becomes smaller (An image moves upward.)
-: Left margin becomes larger (An image moves downward.)
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range -50 to 50
Unit 0.1 mm
REG-MFH1 Rgst start tmg adj: MP Tray,Hvy,1/2 SPD
Lv.1 Details To adjust the top margin by changing the timing to turn ON the
Registration Motor when feeding heavy paper at 1/2 speed from the
Multi-purpose Tray.
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1 mm.
+: Top margin becomes smaller (An image moves upward.)
-: Left margin becomes larger (An image moves downward.)
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range -50 to 50
Unit 0.1 mm
REG-MFH2 Rgst start tmg adj: MP Tray,Hvy,1/3 SPD
Lv.1 Details To adjust the top margin by changing the timing to turn ON the
Registration Motor when feeding heavy paper at 1/3 speed from the
Multi-purpose Tray.
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1 mm.
+: Top margin becomes smaller (An image moves upward.)
-: Left margin becomes larger (An image moves downward.)
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range -50 to 50
Unit 0.1 mm