Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 383

Address bit Name
P010 0-7 Not used
8 Riser PCB Version bit0
9 Riser PCB Version bit1
10 Riser PCB Version bit2
11 Riser PCB Version bit3
12 HDD Cooling Fan Error Detection
13 Controller Fan 1 Error Detection
14 Controller Fan 2 Error Detection
15 Controller-related Fan State
Detection
P011 0-15 Not used
P012 0-15 Not used
P013 0-15 Not used
P014 0-15 Not used
P015 0-15 Not used
P016 0-15 Not used
Symbol Remarks
- -
- -
- -
- -
- -
FM21 0: Normal, 1: Abnormal
FM19 0: Normal, 1: Abnormal
FM20 0: Normal, 1: Abnormal
FM19,20,21 0: One of the Fans is abnormal
1: All fans are normal
- -
- -
- -
- -
- -
- -
T-5-15
■ Reader (R-CON>P001 to P007)
Address bit Name
P001 0 Scanner Unit HP Sensor
Interruption
1 DDI-SPO1
2 Fan Lock Signal (Reserve)
3 DDI-SRTS
4 DDI-SCPRDY
5 Silent Mode
6 Board Test
7 12V Power Supply Monitor
P002 0 24V Power Supply Monitor
1 Reader-DADF Connect
2 Location Information 0
3 Location Information 1
4 Debug LED
5 Memory Identification
6 Model Identification
7 Original Size Sensor 1
P003 0 Original Size Sensor 2
1 DADF Sensor 1
2 DADF Sensor 2
3 Scanner Unit Heat Exhaust Fan
Lock Signal
4 Scanner Unit Cooling Fan Lock
Signal
5 LED Select 1
6 LED Select 2
7 -
Symbol Remarks
SR2 1: HP
- Not used
- -
- 0: Reception is available
- 0: Controller ready
- 1: Normal start-up, 0: Silent start-
up
- 1: Normal start-up, 0: PCB check
- 0: Power supply
- 0: Power supply
- 1: Connect, 0: Unconnected AP
- Not used
- Not used
- Not used
- 1: Model with memory, 0: Model
without memory
- 1: X-system or Copyboard, 0:
S-system
CF1 0: Original presence
CF2 0: Original presence
SR1 1: Close, 0: Open
SR3 1: Close, 0: Open
FM1 1: Failure
FM2 1: Failure
- DIPSW2, 3 (1,1): Rank A, (1,0):
Rank B, (0,1): Rank C
-
- -
5-155
5