Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 11

♦: Replacement (Periodical replacement) ●: Replacement (Consumable parts) Δ: Cleaning ×: Lubrication □: Adjustment ■: Inspection
Category Part Name
24 Post-secondary Transfer Sensor
25 Patch Sensor
26 ITB Unit
27 ITB Driver Roller
28 ITB Stirring Roller
29 ITB Inside Scraper
30 ITB HP Sensor
Image
31 ITB Displacement Sensor
Formation
System
32 ITB Cleaning Unit
33 ITB
34 ITB Cleaning Blade
35 Primary Transfer Roller (Y)
36 Primary Transfer Roller (M)
37 Primary Transfer Roller (C)
38 Primary Transfer Roller (Bk)
39 Secondary Transfer Inner Roller
40 ITB Inner Scraper Holder
41 Secondary Transfer Outer Roller
42 Secondary Transfer Static Eliminator
Interva
Part No
- 1 Δ
- 1 Δ
- 1 □
- 1
- 1
- 1
- 1
- 1
- 1
FY7-0409 1 ●
FC8-1699 1 ●
FY7-0412 1 ●
FY7-0412 1 ●
FY7-0412 1 ●
FY7-0412 1 ●
FC7-9325 1 ●
FL3-4902 1 ●
FC9-0386 1 ●
FM3-9841 1 ●
Counter
Δ - - Use the blower brush. If dirt is obvious, execute cleaning as needed.
- - Clean it with water when replacing the Bk Drum.
□ - - When releasing the pressure of ITB Unit, execute the following item.
- COPIER>FUNCTION>INSTALL>INIT-ITB
- Settings/Registration>Adjustment/Maintenance>Adjust Image
Quality>Auto Correct Color Mismatch
Δ - - Clean it with alcohol and lint-free paper.
Execute this when replacing the ITB.
Δ - - Clean it with alcohol and lint-free paper.
Execute this when replacing the ITB.
Δ - - Clean it with alcohol and lint-free paper.
Execute this when replacing the ITB.
Δ - - Clean it with blower brush.
Execute this when replacing the ITB.
Δ - - Clean it with blower brush.
Execute this when replacing the ITB.
■ - - Remove the toner piled up on the back of Scoop-up Sheet when
replacing the ITB Cleaning.
DRBL-1 TR-BLT
DRBL-1 ITB-BLD1
DRBL-1 1TR-RL-Y
DRBL-1 1TR-RL-M
DRBL-1 1TR-RL-C
DRBL-1 1TR-RL-K
DRBL-1 2TR-INRL
DRBL-1 WST-TNR
Δ DRBL-1 2TR-ROLL Clean up the paper dust with lint-free paper when replacing the
Secondary Transfer Outer Roller.
Δ DRBL-1 TR-STC-H Clean up the paper dust with lint-free paper when replacing the
Secondary Transfer Outer Roller.
Remark
1
1-3