Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 731

FEEDER> ADJUST
ADJSSCN2 Zoom adj in 2-sided vert scan way: back
Lv.1 Details To make a fine adjustment of the back side image magnification in
vertical scanning direction at the time of DADF duplex scanning.
As the value is incremented by 1, the image is reduced by 0.1% in
vertical scanning direction.
Use case When a displacement occurs to the front/back side image
magnification at the time of duplex scanning
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -10 to 10
Unit 0.10%
Default value 0
FUNCTION
SENS-INT
Lv.1 Details
Use case
Adj/set/operate method Select the item, and then press OK key.
MTR-CHK
Lv.1 Details
T-5-94
Use case
Adj/set/operate method Enter the value, and then press OK key.
Display/adj/set range
Related service mode
TRY-A4
Lv.1 Details
Use case
TRY-A5R
Lv.1 Details
Use case
TRY-LTR
Lv.1 Details
Use case
TRY-LTRR
Lv.1 Details
Use case
FEEDER> FUNCTION
Initialization of DADF Sensors
To initialize DADF Sensors.
When replacing Reader Controller PCB / Post-separation Sensor 1
(SR2) / Post-separation Sensor 2 (SR3) / Post-separation Sensor 3
(PCB2) / Registration Sensor (PCB3) / Lead Sensor 1 (PCB4) / Lead
Sensor 2 (SR5)
Specifying DADF Operation Motor
To specify the DADF Motor to operate.
The motor is activated by MTR-ON.
At operation check
0 to 9
0: Pickup Motor (M1), 1: Feed Motor (M2), 2: Registration Motor (M3),
3: Read Motor (M4), 4: Delivery Motor (M5), 5: Disengagement Motor
1 (M6), 6: Disengagement Motor 2 (M7), 7: Tray Lifter Motor (M8), 8:
Glass Shift Motor (M9), 9: Pickup Roller Unit Lifter Motor (M10)
FEEDER> FUNCTION> MTR-ON
Adj of DADF Tray width detect ref 1: A4
To automatically adjust the paper width detection reference point 1
for the DADF Tray. (A4)
• When replacing the Original Width Volume (VR)
• When replacing the Reader Controller PCB/clearing RAM data
Adj of DADF Tray width detect ref 2: A5R
To automatically adjust the paper width detection reference point 2
for the DADF Tray. (A5R)
• When replacing the Original Width Volume (VR)
• When replacing the Reader Controller PCB/clearing RAM data
Adj of DADF Tray width detect ref 1: LTR
To automatically adjust the paper width detection reference point 1
for the DADF Tray. (LTR)
• When replacing the Original Width Volume (VR)
• When replacing the Reader Controller PCB/clearing RAM data
Adj of DADF Tray width detect ref2: LTRR
To automatically adjust the paper width detection reference point 2
for the DADF Tray. (LTRR)
• When replacing the Original Width Volume (VR)
• When replacing the Reader Controller PCB/clearing RAM data
5
5-503