Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 736

SORTER
ADJUST
PNCH-HLE Adj of punch hole pstn from paper edge
Lv.1 Details To adjust the length from the paper edge to the punch hole.
As the value is incremented by 1, the punch hole moves by mm.
+:
-:
Use case Upon user's request
Display/adj/set range -4 to 2
Unit mm
Default value 0
PNCH-Y Adj punch hole side rgst pstn (Booklet)
Lv.1 Details To adjust the punch hole in side registration direction.
As the value is incremented by 1, the punch hole moves by 0.45mm.
+: Toward rear
-: Toward front
Use case When the punch hole is misaligned in the side registration direction
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -5 to 5
Unit 0.45 mm
Default value 0
PF-A3Z1 Adj of A3 Z-fold position (1st): PFU
Lv.1 Details To adjust the 1st fold position of A3 paper Z-fold position on Paper
5
Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
+:
-:
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -65 to 65
Unit 0.5 mm
Appropriate target value 0
Default value 0
5-508
SORTER> ADJUST
SORTER> ADJUST
PF-A3Z2 Adj of A3 Z-fold position (2nd): PFU
Lv.1 Details To adjust the 2nd fold position of A3 paper Z-fold position on Paper
Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
+:
-:
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -65 to 65
Unit 0.5 mm
Appropriate target value 0
Default value 0
PF-B4Z1 Adj of B4 Z-fold position (1st): PFU
Lv.1 Details To adjust the 1st fold position of B4 paper Z-fold position on Paper
Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
+:
-:
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -65 to 65
Unit 0.5 mm
Appropriate target value 0
Default value 0
PF-B4Z2 Adj of B4 Z-fold position (2nd): PFU
Lv.1 Details To adjust the 2nd fold position of B4 paper Z-fold position on Paper
Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
+:
-:
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -65 to 65
Unit 0.5 mm
Appropriate target value 0
Default value 0