Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 133

E Detailed Occurance Items
code code area
E602 -0103 -00 Title Hard disk failure
Description /FSTDEV is abnormal
of detection
Measures 1. Input applicable CHK-TYPE into a partition; and
execute HDD-CHECK (requires several minutes to
some dozens of minutes); and then power cycle (Power
OFF/ON)
2. If not recovery, input applicable CHK-TYPE into a
partition; and execute HDD-CLEAR; and then power
cycle (Power OFF/ON)
E602 -0104 -00 Title Hard disk failure
Description /FSTDEV is abnormal
of detection
Measures 1. Check a cable or power supply connector
2. If not recovery, boot-up in safe mode, and use SST to
execute full-format and to re-install system (SYSTEM,
LANGUAGE, RUI); and then power cycle of main
power (Power OFF/ON)
3. If still not recovery, replace HDD and re-install system
based on judging HDD failure.
E602 -0105 -00 Title Hard disk failure
Description /FSTDEV is abnormal
of detection
Measures 1. Input applicable CHK-TYPE into a partition; and
execute HDD-CLEAR; and then power cycle (Power
OFF/ON)
2. If not recovery, replace HDD and re-install system
based on judging HDD failure.
E602 -0110 -00 Title Hard disk failure
Description /FSTDEV is abnormal
of detection
Measures This is an error due to data error or software bug.
1. Boot-up in safe mode, and use SST to execute full-
format and to re-install system (SYSTEM, LANGUAGE,
RUI); and then power cycle of main power (Power
OFF/ON)
2. If not recovery, replace HDD and re-install system
based on judging HDD failure.
E602 -0111 -00 Title Hard disk failure
Description /FSTDEV is abnormal
of detection
Measures This is an error that usually does not occur at Read/Write
level.
1. Check a cable or power supply connector
2. If not recovery, replace HDD and re-install system
based on judging HDD failure.
Description E Detailed Occurance Items
code code area
E602 -0112 -00 Title Hard disk failure
Description /FSTDEV is abnormal
of detection
Measures This is an error due to data error or software bug.
1. Boot-up in safe mode, and use SST to execute full-
2. If not recovery, replace HDD and re-install system
E602 -0113 -00 Title Hard disk failure
Description /FSTDEV is abnormal
of detection
Measures It is very likely that document data such as Inbox on the
HDD are damaged.
1. Input applicable CHK-TYPE into a partition; and
2. If not recovery, input applicable CHK-TYPE into a
3. If still not recovery, replace HDD and re-install system
E602 -0114 -00 Title Hard disk failure
Description /FSTDEV is abnormal
of detection
Measures This is an error due to data error or software bug.
1. Boot-up in safe mode, and use SST to execute full-
2. If not recovery, replace HDD and re-install system
E602 -0121 -00 Title Hard disk failure
Description /FSTDEV is abnormal
of detection
Measures This is an error that usually does not occur at Read/Write
level.
1. Check a cable or power supply connector
2. If not recovery, replace HDD and re-install system
Description
format and to re-install system (SYSTEM, LANGUAGE,
RUI); and then power cycle of main power (Power
OFF/ON)
based on judging HDD failure.
execute HDD-CHECK (requires several minutes to
some dozens of minutes); and then power cycle.
partition; and execute HDD-CLEAR; and then power
cycle
(in the case of BOOTDEV, BOOTDEV2, APL_SEND,
execute re-format / reinstallation with SST)
based on judging HDD failure.
format and to re-install system (SYSTEM, LANGUAGE,
RUI); and then power cycle of main power (Power
OFF/ON)
based on judging HDD failure.
based on judging HDD failure.
3
3-107