Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 122

E Detailed Occurance Items
code code area
E5AA -8002 -05 Title
Description
of detection
Measures
E5AA -8003 -05 Title
Description
of detection
Measures
3
E5AE -8000 -05 Title
Description
of detection
Measures
E5BA -8001 -05 Title
Description
of detection
Measures
3-96
Description
Error in the cutter motor (Finisher-A1)
The cutter motor clock sensor does not come off the
home position of the trimming blade when the cutter
motor has been driven for 0.5 second.
1. The connector of the cutter motor clock sensor (S108)
or the cutter motor (M106) are disconnected.
2. The wiring of the cutter motor clock sensor/the cutter
motor are faulty.
3. The cutter motor clock sensor is faulty.
4. The cutter motor is faulty.
5. The trimmer controller PCB (PCB1) is faulty.
Cutter motor clock error (Finisher-A1)
The cutter motor clock sensor does not detect the motor
clock when the cutter motor has been driven for 0.625
second.
1. The connector of the cutter motor clock sensor (S108)
or the cutter motor (M106) are disconnected.
2. The wiring of the cutter motor clock sensor/the cutter
motor are faulty.
3. The cutter motor clock sensor is faulty.
4. The cutter motor is faulty.
5. The trimmer controller PCB (PCB1) is faulty.
Trimmer stationary paper error
The inlet sensor detects the stationary paper after
performing the paper delivery operation.
1. The paper has jammed in the trimmer.
2. The connector of the inlet sensor (S101) is
disconnected.
3. The wire of the inlet sensor is faulty.
4. The inlet sensor is faulty.
5. The trimmer controller PCB (PCB1) is faulty.
Error in the front estrangement motor (Finisher-A1)
The front estrangement motor HP sensor does not turn
ON when the front estrangement motor has been driven
for 0.191 second.
1. The connector of the front estrangement motor HP
sensor (S102) or the front estrangement motor (M103)
are disconnected.
2. The wiring of the front estrangement motor HP sensor/
the front estrangement motor are faulty.
3. The front estrangement motor HP sensor is faulty.
4. The front estrangement motor is faulty.
5. The trimmer controller PCB (PCB1) is faulty.
E Detailed Occurance Items
code code area
E5BA -8002 -05 Title Error in the front estrangement motor (Finisher-A1)
Description The front estrangement motor HP sensor does not turn
of detection OFF when the front estrangement motor has been driven
for 0.724 second after the front estrangement motor HP
sensor has turned ON.
Measures 1. The connector of the front estrangement motor HP
sensor (S102) or the front estrangement motor (M103)
are disconnected.
2. The wiring of the front estrangement motor HP sensor/
the front estrangement motor are faulty.
3. The front estrangement motor HP sensor is faulty.
4. The front estrangement motor is faulty.
5. The trimmer controller PCB (PCB1) is faulty.
E5BA -8011 -05 Title Error in the rear estrangement motor (Finisher-A1)
Description The rear estrangement motor HP sensor does not turn
of detection ON when the rear estrangement motor has been driven
for 0.18 second.
Measures 1. The connector of the rear estrangement motor HP
sensor (S104) or the rear estrangement motor (M104)
are disconnected.
2. The wiring of the rear estrangement motor HP sensor/
the rear estrangement motor are faulty.
3. The rear estrangement motor HP sensor is faulty.
4. The rear estrangement motor is faulty.
5. The trimmer controller PCB (PCB1) is faulty.
E5BA -8012 -05 Title Error in the rear estrangement motor (Finisher-A1)
Description The rear estrangement motor HP sensor does not turn
of detection OFF when the rear estrangement motor has been driven
for 0.537 second.
Measures 1. The connector of the rear estrangement motor HP
sensor (S104) or the rear estrangement motor (M104)
are disconnected.
2. The wiring of the rear estrangement motor HP sensor/
the rear estrangement motor are faulty.
3. The rear estrangement motor HP sensor is faulty.
4. The rear estrangement motor is faulty.
5. The trimmer controller PCB (PCB1) is faulty.
E5BB -8001 -05 Title Error in the waste paper full sensor (Finisher-A1)
Description The A/D input value does not enter into the D/A output
of detection upper limit of the waste paper full sensor.
Measures 1. The connector of the waste paper full sensor (emitting/
receiving) (S011) is disconnected.
2. The wire of the waste paper full sensor is faulty.
3. The waste paper full sensor is faulty.
4. The trimmer controller PCB (PCB1) is faulty.
Description