Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 460

COPIER> ADJUST> HV-TR
TR-PPR8 Sec trns indiv setting paper type: set 8
Lv.2 Details To set the paper type (paper weight) for setting 8.
Setting 8 is the combination condition of environment, paper type
(paper weight), color mode and feed side that are set in TR-ENV8,
TR-PPR8, TR-CLR8 and TR-DUP8. When this condition is satisfied,
the target current that is set in 2TR-TGT8 and paper allotted voltage
that is set in 2TR-SHR8 are applied to the Secondary Transfer Outer
Roller.
Use case When an image failure that differs due to the paper type occurs
(mottled image/density loss due to excessive transfer/toner scattering
on solid image)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 13
1: Plain paper (64 to 105 g/m2)
2: Recycled paper (64 to 105 g/m2)
3: Thin paper (52 to 63 g/m2)
4: Heavy paper (106 to 220 g/m2)
5: Heavy paper (221 to 300 g/m2)
6: Coated paper (106 to 220 g/m2)
7: Coated paper (221 to 300 g/m2)
8: Transparency
9: Textured paper
10, 11: Not used
12: Postcard
13: Labels
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-ENV8, TR-CLR8, TR-DUP8, 2TR-
TGT8, 2TR-SHR8
5
TR-ENV1 Sec trns indiv setting environment:set 1
Lv.2 Details To set the environment (absolute moisture amount) for setting 1.
Setting 1 is the combination condition of environment, paper type
(paper weight), color mode and feed side that are set in TR-ENV1,
TR-PPR1, TR-CLR1 and TR-DUP1. When this condition is satisfied,
the target current that is set in 2TR-TGT1 and paper allotted voltage
that is set in 2TR-SHR1 are applied to the Secondary Transfer Outer
Roller.
Use case When an image failure that differs due to the environment occurs
(mottled image/density loss due to excessive transfer/toner scattering
on solid image)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 3
1: Low humidity (Absolute moisture amount: 5.8g/m3 and less)
2: Normal humidity (5.9 to 15g/m3)
3: High humidity (15.1g/m3 and more)
Default value 2
Related service mode COPIER> ADJUST> HV-TR> TR-PPR1, TR-CLR1, TR-DUP1, 2TR-
TGT1, 2TR-SHR1
5-232
COPIER> ADJUST> HV-TR
TR-ENV2 Sec trns indiv setting environment:set 2
Lv.2 Details To set the environment (absolute moisture amount) for setting 2.
Setting 2 is the combination condition of environment, paper type
(paper weight), color mode and feed side that are set in TR-ENV2,
TR-PPR2, TR-CLR2 and TR-DUP2. When this condition is satisfied,
the target current that is set in 2TR-TGT2 and paper allotted voltage
that is set in 2TR-SHR2 are applied to the Secondary Transfer Outer
Roller.
Use case When an image failure that differs due to the environment occurs
(mottled image/density loss due to excessive transfer/toner scattering
on solid image)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 3
1: Low humidity (Absolute moisture amount: 5.8g/m3 and less)
2: Normal humidity (5.9 to 15g/m3)
3: High humidity (15.1g/m3 and more)
Default value 2
Related service mode COPIER> ADJUST> HV-TR> TR-PPR2, TR-CLR2, TR-DUP2, 2TR-
TGT2, 2TR-SHR2
TR-ENV3 Sec trns indiv setting environment:set 3
Lv.2 Details To set the environment (absolute moisture amount) for setting 3.
Setting 3 is the combination condition of environment, paper type
(paper weight), color mode and feed side that are set in TR-ENV3,
TR-PPR3, TR-CLR3 and TR-DUP3. When this condition is satisfied,
the target current that is set in 2TR-TGT3 and paper allotted voltage
that is set in 2TR-SHR3 are applied to the Secondary Transfer Outer
Roller.
Use case When an image failure that differs due to the environment occurs
(mottled image/density loss due to excessive transfer/toner scattering
on solid image)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 3
1: Low humidity (Absolute moisture amount: 5.8g/m3 and less)
2: Normal humidity (5.9 to 15g/m3)
3: High humidity (15.1g/m3 and more)
Default value 2
Related service mode COPIER> ADJUST> HV-TR> TR-PPR3, TR-CLR3, TR-DUP3, 2TR-
TGT3, 2TR-SHR3