Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 599

COPIER> OPTION> NETWORK
802XTOUT Set of IEEE802.1X authentication timeout
Lv.1 Details To set timeout value for IEEE802.1X authentication.
If the device executes 802.1X authentication, change the wait time
for response from the authentication server.
Use case When response from the authentication server is slow/fast
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 10 to 120
Unit second
Default value 30
IKERETRY Setting of IKE retry times
Lv.1 Details To set the number of retries in the case of no response from the
communication target at the time of IKE packet transmission.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 3
Default value 2
Supplement/memo IKE: Internet Key Exchange
SPDALDEL Initialization of SPD value
Lv.2 Details To initialize all the SPD values that is under management.
SPD values can be initialized without clearing SRAM.
Use case At the time of SPD value mismatch when IPSec Board is added
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Supplement/memo SPD: Database that manages SA (Security Association).
SPD value is managed when IPSec Board is used. Normally, SRAM
needs to be cleared in the case of mismatch in SPD value.
NCONF-SW ON/OFF of Network Configurator function
Lv.1 Details To set ON/OFF of Network Configurator function.
If the user does not use the function, select OFF to prevent remote
attack through network.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 1
Supplement/memo Network Configurator function is a function to be used for
communication with NetSpot Device Installer, etc., and the network
setting can be changed from the remote.
COPIER> OPTION> NETWORK
IKEINTVL Setting of IKE retry interval
Lv.1 Details To set retry interval in the case of no response from the
communication target at the time of IKE packet transmission.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 10
Unit second
Default value 5
Supplement/memo IKE: Internet Key Exchange
IPSDEBLV Setting of IPSec debug level
Lv.2 Details For R&D use
SP-LINK Mode setting at 1W sleep
Lv.1 Details Switch to execute 10base-T standby as default to realize the standby
power 1W in sleep mode.
Use case When shifting to sleep mode after negotiation (same as conventional
machines)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Shift to sleep mode with 10base-T
1: Shift to sleep mode after negotiation
Default value 0
AFS-JOB Set of FAX server job reception port
Lv.1 Details To set the reception port of the fax server to which a fax client sends
jobs.
Use case When changing the job reception port of the fax server
Display/adj/set range 0 to 65535
Default value 20317
Related service mode COPIER> OPTION> NETWORK> AFC-JOB, AFC-EVNT
AFC-JOB Set of FAX client job sending port
Lv.1 Details To set the port of a fax client from which jobs are sent to the fax
server.
Use case When changing the job sending port of a fax client
Display/adj/set range 0 to 65535
Default value 20317
Related service mode COPIER> OPTION> NETWORK> AFS-JOB, AFC-EVNT
AFC-EVNT Set of FAX client event reception port
Lv.1 Details To set the event notification reception port of a fax client.
Use case When changing the event notification reception port of a fax client
Display/adj/set range 0 to 65535
Default value 29400
Related service mode COPIER> OPTION> NETWORK> AFS-JOB, AFC-JOB
5
5-371