Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 168

E Detailed Occurance Items
code code area
E719 -0012 -00 Title
Description
of detection
Measures
E719 -0031 -00 Title
Description
of detection
Measures
3
E719 -0032 -00 Title
Description
of detection
Measures
E720 -0001 -05 Title
Description
of detection
Measures
E720 -0002 -05 Title
Description
of detection
Measures
E720 -0003 -05 Title
Description
of detection
3-142
Description
IPC error in the card reader operation
Error in IPC when NewCardReader is running.
- In the case of disconnection of IPC or an error in which
IPC communication failed to be recovered.
Check the connection between charging management
equipment and machine, and check that the Cable is not
open-circuit.
Clear the error while the charging management
equipment is connected to operate and when switching to
the operation without charging management equipment.
(To prevent the misuse by removing the charging
management equipment, this error code is displayed.)
Communication error in the card reader (a serial number)
startup
Failure in communication with the serial New Card
Reader at start-up.
- Check if the cable of the serial New Card Reader is
disconnected.
- Take out the serial New Card Reader.
- COPIER > Function > CLEAR > CARD
- COPIER > Function > CLEAR > ERR
Communication error after the card reader (a serial
number) startup
Communication failed in the middle of the operation
although communication with the serial New Card
Reader was successful at start-up.
- Check if the cable of the serial New Card Reader is
disconnected.
Model mismatch error
An accessory that is not supported is connected.
Check the configuration of accessories.
The Staple Finisher-B1 is connected to the iR ADV
C9075.
Model mismatch error
An accessory that is not supported is connected.
Check the configuration of accessories.
The Staple Finisher-B1 is connected to the iR ADV
C9065.
Model mismatch error
An accessory that is not supported is connected.
E Detailed Occurance Items
code code area
Measures Check the configuration of accessories.
The Staple Finisher-B1 is connected to the iR ADV
C9065.
Description