Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 628

COPIER> OPTION> USER
STPL-MAX Set of max number of sheets for staple
Lv.2 Details To set the maximum number of sheets to be stapled in the Finisher.
When "1: 60 sheets" is set, the stapling capacity becomes 60 sheets.
Display/adj/set range 0 to 1
0: 50 sheets, 1: 60 sheets
Default value 0
USBK-DSP [Not used]
SCALL-SW Display/hide of repair request button
Lv.1 Details To set whether to display or hide the repair-request button on the
Control Panel.
Use case When the sales company supports service by the repair-request
button
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
SCALLCMP Set of repair request complete notice
Lv.1 Details With this setting enabled, a notification of repair completion is sent
to UGW server to clear the repair-request status that is retained
internally.
Use case Service technician uses this mode after completing repair
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
Default value 0
USBH-DSP Display/hide of USB host usage
5
Lv.2 Details To set whether to display "Preferences > External Interface > USB
Settings > Use USB Host".
By selecting "1: Display", whether to use USB host on USB setting
screen can be selected.
Use case When switching to display or hide "Use USB Host" on USB setting
screen
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
Related user mode Preferences > External Interface > USB Settings > Use USB Host
5-400
COPIER> OPTION> USER
USBM-DSP Dis/hide of USB ex-memory device driver
Lv.2 Details To set whether to display "Preferences > External Interface > USB
Settings > Use MEAP Driver for USB External Device".
By selecting "0: Hide", the item is not displayed, and the user
administrator cannot change the setting of the MEAP driver for the
USB external memory device.
Use case When prohibiting the user administrator to change the setting of
"Use MEAP driver for USB external device", set 0 after the specified
setting is completed.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
Related user mode Preferences> External Interface> USB Settings> Use MEAP Driver
for USB External Device
USBI-DSP Dis/hide of USB input device driver set
Lv.2 Details To set whether to display "Preferences > External Interface > USB
Settings > Use MEAP Driver for USB Input Device".
By selecting "0: Hide", the item is not displayed, and the user
administrator cannot change the setting of the MEAP driver for the
USB input device.
Use case When prohibiting the user administrator to change the setting of "Use
MEAP Driver for USB Input Device", set 0 after the specified setting
is completed.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
Related user mode Preferences > External Interface > USB Settings > Use MEAP Driver
for USB Input Device
CTCHKDSP Display/hide of counter print
Lv.1 Details To set whether to display or hide "Print List" on the Counter Check
screen.
Model name, model number information, counter check date and
counter information can be output as a total count management
report.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1