Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 305

■ FIXING
COPIER> DISPLAY> FIXING
FX-MTR2 Dis Fix Motor crrnt VLlog at 321mm/sec
Lv.2 Details To display the maximum Fixing Motor current values at process
speed of 321mm/sec.
Display an alarm (06-0004) when the value is 2.30 (2.3A) and higher,
and display an error (E008-001) when the value is 2.60 (2.6A) and
higher.
Use case When investigating the drive torque at the Pressure Belt Unit
replacement or error occurrence
Adj/set/operate method N/A (display only)
Caution • Display unit for process speed of 321mm/sec differs from other
process speeds.
• Press the Clear key at FX-BLT-L when replacing the Pressure Belt
Unit. For other than the replacement, execute FX-L-CLR to reset.
Display/adj/set range 0.00 to 5.00
Unit 1 A
Related service mode COPIER> FUNCTION> CLEAR> FX-L-CLR
COPIER> COUNTER> DRBL-1> FX-BLT-L
FX-MTR3 Dis Fix Motor crrnt VL history: 280mm/s
Lv.2 Details To display the maximum and latest Fixing Motor current values at
process speed of 280mm/sec.
Display an alarm (06-0004) when the value is 200 (2.0 A) and higher,
and display an error (E008-001) when the value is 220 (2.2 A) and
higher.
Use case When investigating the drive torque at the Pressure Belt Unit
replacement or error occurrence
Adj/set/operate method N/A (display only)
Caution Press the Clear key at FX-BLT-L when replacing the Pressure Belt
Unit. For other than the replacement, execute FX-L-CLR to reset.
Display/adj/set range 0 to 500, 0 to 500
Unit 10 mA
Related service mode COPIER> FUNCTION> CLEAR> FX-L-CLR
COPIER> COUNTER> DRBL-1> FX-BLT-L
COPIER> DISPLAY> FIXING
FX-MTR4 Dis Fix Motor crrnt VL history: 160mm/s
Lv.2 Details To display the maximum and latest Fixing Motor current values at
process speed of 160 mm/sec.
Display an alarm (06-0004) when the value is 130 (1.3 A) and higher,
and display an error (E008-001) when the value is 150 (1.5 A) and
higher.
Use case When investigating the drive torque at the Pressure Belt Unit
replacement or error occurrence
Adj/set/operate method N/A (display only)
Caution Press the Clear key at FX-BLT-L when replacing the Pressure Belt
Unit. For other than the replacement, execute FX-L-CLR to reset.
Display/adj/set range 0 to 500, 0 to 500
Unit 10 mA
Related service mode COPIER> FUNCTION> CLEAR> FX-L-CLR
COPIER> COUNTER> DRBL-1> FX-BLT-L
FX-MTR5 Dis Fix Motor crrnt VL history: 140mm/s
Lv.2 Details To display the maximum and latest Fixing Motor current values at
process speed of 140 mm/sec.
Display an alarm (06-0004) when the value is 120 (1.2 A) and higher,
and display an error (E008-001) when the value is 130 (1.3 A) and
higher.
Use case When investigating the drive torque at the Pressure Belt Unit
replacement or error occurrence
Adj/set/operate method N/A (display only)
Caution Press the Clear key at FX-BLT-L when replacing the Pressure Belt
Unit. For other than the replacement, execute FX-L-CLR to reset.
Display/adj/set range 0 to 500, 0 to 500
Unit 10 mA
Related service mode COPIER> FUNCTION> CLEAR> FX-L-CLR
COPIER> COUNTER> DRBL-1> FX-BLT-L
FX-MTR6 Dis Fix Motor crrnt VL history: 107mm/s
Lv.2 Details To display the maximum and latest Fixing Motor current values at
process speed of 107 mm/sec.
Display an alarm (06-0004) when the value is 100 (1.0 A) and higher,
and display an error (E008-001) when the value is 120 (1.2 A) and
higher.
Use case When investigating the drive torque at the Pressure Belt Unit
replacement or error occurrence
Adj/set/operate method N/A (display only)
Caution Press the Clear key at FX-BLT-L when replacing the Pressure Belt
Unit. For other than the replacement, execute FX-L-CLR to reset.
Display/adj/set range 0 to 500, 0 to 500
Unit 10 mA
Related service mode COPIER> FUNCTION> CLEAR> FX-L-CLR
COPIER> COUNTER> DRBL-1> FX-BLT-L
5
5-77