Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 478

COPIER> ADJUST> CST-ADJ
MDK2-A4 Adj of Multi Deck (Mid) A4 paper width
Lv.1 Details To adjust the width of A4 size paper in the Multi Deck (Middle).
When replacing the DC Controller PCB/clearing RAM data, enter the
value of service label.
When replacing the Paper Width Detection PCB or registering a new
value, execute COPIER> FUNCTION> CST> A4.
Use case • When replacing the DC Controller PCB/clearing RAM data
• When the Paper Width Detection PCB is replaced or a new value
is registered
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution After the setting value is changed, write the changed value in the
service label.
Display/adj/set range 0 to 255
Related service mode COPIER> FUNCTION> CST> A4
MDK2-A5R Adj of Multi Deck (Mid) A5R paper width
Lv.1 Details To adjust the width of A5R size paper in the Multi Deck (Middle).
When replacing the DC Controller PCB/clearing RAM data, enter the
value of service label.
When replacing the Paper Width Detection PCB or registering a new
value, execute COPIER> FUNCTION> CST> A5R.
Use case • When replacing the DC Controller PCB/clearing RAM data
• When the Paper Width Detection PCB is replaced or a new value
is registered
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution After the setting value is changed, write the changed value in the
5
service label.
Display/adj/set range 0 to 255
Related service mode COPIER> FUNCTION> CST> A5R
MDK3-A4 Adj of Multi Deck (Lower) A4 paper width
Lv.1 Details To adjust the width of A4 size paper in the Multi Deck (Lower).
When replacing the DC Controller PCB/clearing RAM data, enter the
value of service label.
When replacing the Paper Width Detection PCB or registering a new
value, execute COPIER> FUNCTION> CST> A4.
Use case • When replacing the DC Controller PCB/clearing RAM data
• When the Paper Width Detection PCB is replaced or a new value
is registered
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution After the setting value is changed, write the changed value in the
service label.
Display/adj/set range 0 to 255
Related service mode COPIER> FUNCTION> CST> A4
5-250
COPIER> ADJUST> CST-ADJ
MDK3-A5R Adj of Multi Deck(Lower) A5R paper width
Lv.1 Details To adjust the width of A5R size paper in the Multi Deck (Lower).
When replacing the DC Controller PCB/clearing RAM data, enter the
value of service label.
When replacing the Paper Width Detection PCB or registering a new
value, execute COPIER> FUNCTION> CST> A5R.
Use case • When replacing the DC Controller PCB/clearing RAM data
• When the Paper Width Detection PCB is replaced or a new value
is registered
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution After the setting value is changed, write the changed value in the
service label.
Display/adj/set range 0 to 255
Related service mode COPIER> FUNCTION> CST> A5R
T-5-42