Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 211

SMB Auth. Settings
Use SMB Authentication
Authentication Type
SNMP Settings
Get Printer Mgmt Info from Host
Use SNMPv1
Community Name1Settings
Community Name1
MIB Access Permission
Community Name
Community Name2 Settings
Community Name2
MIB Access Permission
Community Name
Use SNMPv3
User Settings
User On, Off
Register
Details/Edit
Delete
Context Settings
Register
Edit
Delete
Dedicated Port Settings
Dedicated Port Settings
Use Spool Function
Use Spool Function
Startup Settings
Startup Settings
Ethernet Driver Settings
Auto Detect
Communication Mode
Ethernet Type
MAC Address
IEEE802.1X Settings
Use IEEE802.1X
User
Item Setting Description
On, Off*
NTLMv1*, NTLMv2*
On, Off*
On*, Off
On*, Off
Read/Write/Read Only*
Community Name (32 characters maximum) (public*)
On, Off*
Read/Write/Read Only*
Community Name (32 characters maximum) (public2*)
On, Off*
-
User/MIB Access Permission/Security Settings/Authent.
Algorithm/Authent.Password/Encryption Algorithm/
Encryption Password
User/MIB Access Permission/Security Settings/Authent.
Algorithm/Authent.Password/Encryption Algorithm/
Encryption Password
-
Context Name (32 characters maximum)
Context Name (32 characters maximum)
-
On*, Off
On, Off*
0 to 300seconds (0*)
On*, Off
Half Duplex*/Full Duplex
10 Base-T*, 100 Base-TX, 1000 Base-T
Display only
On, Off*
Name of the user to be authenticated with IEEE802.1X
authentication
Can be set in Remote Device Information
UI Delivery Available
Yes No
Yes No
Yes No
Yes Yes
Yes Yes
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes Yes
Yes Yes
Yes No
Yes No
Yes No
Yes No
- No
Yes No
Yes No
4
4-9