2Nd Clutch Pressure Switch ('01-02 Models) Replacement - Honda 2002 Accord Manual

2nd Clutch Pressure Switch ('01-02 Models) Replacement
1. Support the transmission with a transmission jack.
2. Remove the rear mount bracket bolts.
10 x 1.25 mm
44 N m (4.5 kgfm, 33 Ibfft)
12 x 1.25 mm
54 N-m (5.5 kgfm,
40 Ibf ft)
3. Remove the rear mount nut (A), then remove the
rear mount bracket (B).
1.25 mm
N m
kgfm, 40 Ibfft)
4. Remove the rear stiffener (A).
A .
5. Disconnect the 2nd clutch pressure switch
connector.
A
8x 1.25 mm
22 N m (2.2 kgf-m, 16 Ibfft)
6. Replace the 2nd clutch pressure switch (A), then
install a new one with a new sealing washer (B).
Tighten the switch on the metal part, not the plastic
part.
(cont'd)
14-111