Honda 2002 Accord Manual page 558

Automatic Transmission
System Description (cont'd)
Hydraulic Flow (cont'd)
11 Position: Driving in 2nd gear
The PCM turns shift solenoid valve C OFF, and controls A/T clutch pressure control solenoid valve A to release LS A
pressure (56). The shift solenoid valves A and B remain ON. Releasing LS A pressure in the CPC valve A releases CPC
A pressure in the 1st clutch pressure circuit. Shift solenoid valve C is turned OFF, and SH C pressure ( S O is applied to
the right side of it. Then shift valve C is moved to the left side to switch the port of line pressure and CPC pressure. The
2nd clutch pressure is changed to line pressure mode, and the 2nd clutch is engaged securely. The CPC B pressure
(5D) stops at shift valve B.
NOTE:
• When used, "left" or "right" indicates direction on the hydraulic circuit.
• Hydraulic circuit shows the '98-99 models; the '00-02 models are similar.
2ND ACCUMULATOR JRD ACCUMULATOR
14-48