Honda 2002 Accord Manual page 245

13. Check the housing-to-outer rotor radial clearance
between the outer rotor (A) and p u m p housing IB).
If the housing-to-outer rotor radial clearance
exceeds the service limit, replace the set of inner
and outer rotors and/or the p u m p housing.
Housing-to-Outer Rotor Radial Clearance
Standard (New): 0 . 1 0 - 0 . 1 9 mm (0.004 0.007 in.)
Service Limit: 0.21 mm (0.008 in.)
14. inspect both rotors and the p u m p housing for
scoring or other damage. Replace parts if
necessary.
15. Remove the old oil seals f r o m the oil p u m p .
16. Gently tap in the new oil seals until the special tool
bottoms on the p u m p .
0 7 L A D - P T 3 0 1 0 A
0 7 7 4 9 - 0 0 1 0 0 0 0
0 7 7 4 6 - 0 0 1 0 3 0 0
Installation
17. Reassemble the oil p u m p , applying liquid thread
lock to the p u m p housing screws.
18. Check that the oil p u m p turns freely.
19. Clean and dry the oil p u m p mating surface.
(cont'd)
8 - 9